Hace poco han sido publicados una nueva versión del controlador del SSD. La versión nueva pasa de la 040H a la 070H.
Por lo visto arregla un posible bloque del disco duro ademas de prometer un mejor rendimiento del mismo.
Resolved a power-up timing issue that could result in a drive hang, resulting in an inability to communicate with the host computer. The hang condition would typically occur during power-up or resume from Sleep or Hibernate. Most often, a new power cycle will clear the condition and allow normal operations to continue. The failure mode has only been observed in factory test. The failure mode is believed to have been contained to the factory. This fix is being implemented for all new builds, for all form factors, as a precautionary measure. The fix may be implemented in the field, as desired, to prevent occurrence of this boot-time failure. To date, no known field returns have been shown to be related to this issue. A failure of this type would typically be recoverable by a system reset.
Crucial m4 Firmware 070H
He realizado pruebas antes y después de actualizar y las mejores no han sido apreciables, también decir que el equipo de pruebas es mi portátil y el interfaz Sata II y no aprovecha todo el rendimiento que puede ofrecer este disco.
Para actualizarlo he seguido los pasos que indica el manual de instalación de Crucial y todo ha ido bien. Aqui se puede ver la info en que realmente se ha actualizado.

Referencias